# Calibrate Screens

Source: https://help.malighting.com/dot2/en/help/key_window_calibratescreens.html
This is grandocs, an unofficial mirror of MA Lighting documentation. For authoritative or safety-relevant information, cite the canonical page on help.malighting.com.

---
**Important:**\
After calibrating the screens, reboot the console so that the calibration can be taken over. 

The **Calibrate Screens Window** is located in the [Setup](/dot2/key_window_setup/), column **Console**, **Calibrate Screens**.

If the touch screens do not fully work, open the Calibrate Screens Window using the encoders.

![](/img/dot2/dot2_viewsandwindows_calibratescreensview01_1-0-f0c0fb.png)

Calibrate the screen in this view. 

Screen calibration calibrates the touch function of your screen so it works flawlessly. 

To calibrate the screen, touch and hold the highlighted cross until the progress bar is completed. 

Select the screen touching the cross. If necessary, repeat the calibration for all other screens.

To cancel the screen calibration, press Esc on the console.

If you do not touch the screen, the **Calibrate Screens Window** closes automatically after 10 seconds.

To reboot the device confirm the system reboot message:

![](/img/dot2/img_calibration_message_box_1-9-b13ad9.png)